某些酚类的高温液相色谱行为

建立了高温液相色谱系统,在高温条件下,采用甲醇-水作为流动相,在Polymerx RP-1聚合物(PSDVB)色谱柱上考察了6种酚类样品的色谱行为.实验条件:温度40～160 ℃,流速0.2～5.5 mL/min,流动相中甲醇浓度范围40%～80%.考察了温度、流速和流动相组成对酚类样品的保留、分辨、柱效和系统压力的影响,探讨了酚类样品在聚合物柱上的热力学行为.温度升高2.35℃大约相当于流动相中甲醇浓度增加1%,可以通过改变色谱柱温度调节样品保留和改变选择性.柱温升高,降低了流动相的粘度,允许在高温条件下使用较高的流速实现快速分离.在160℃、V(甲醇):V(水)=40:60,为流动相和3 mL/min流速条件下,可于2.5 min内实现6种酚类的完全分离.     

Relationships among Preparative Technique,Phase Composition and Bending Strength of Bauxite Porcelain

1 INTRODUCTION Bauxite porcelain is a novel “K2O–Al2O3–SiO2” system ceramic by using sintered bauxite, clay and potash feldspar and albite as the main raw materials with the Al2O3’s content of 50%～60(massfraction). Compared to the traditional“K2O–Al2O3–SiO2” feldspar porcelain by using quartz, bolus alb and potash feldspar and albite as the main raw materials, the bauxite porcelain possesses such advantages as high mechanical strength, excellent electrical insula- tion prop…     

无保护流体室温燐光法测定吲哚-3-丁酸的研究

在仅以碘化钾为重原子微扰剂、亚硫酸钠为除氧剂及无任何保护性介质存在的水溶液中 ,吲哚_3_丁酸 (IBA)能发射很强的室温光 (RTP) ;详细研究了分析测定条件及有机溶剂对RTP的影响 ;在最大光波长λex/λem =281/447nm处 ,光强度与IBA浓度在2.0×10 -7～1.0×10 -5mol/L范围内呈良好的线性关系 ,检出限4.3×10-8 mol/L ;方法直接用于强化水样和土壤中IBA的测定 ,回收率96 %～104 % ,相对标准偏差2.37 %～3.97 %。     

低温燐光的研究及应用

本文综述了44篇文献,介绍低温燐光的发展概况及其应用。     

ADSORPTION CAPACITY OF ACTIVATED CARBON FIBER FABRIC IN CYANIDE LEACHING LIQUOR OF GOLD ORES

1. INTRODUCTION Reclamation of gold in liquid of gold with activated carbon fiber (ACF) is reported. ACF possessed numerous advantages, such as high adsorption capacity, great adsorption rate and high recovery of gold. It was generally considered tha…     

Room Temperature Solid State Reaction Involving Structural Transformation of Covalent Oxide Network

An interesting structural transformation from a two dimensional (2d) covalent oxide network with a layered structure to a three-dimensional (3d) network with a tunnel structure was found at room temperature in the mixture of hydrated alkali-metal molybdenum bronze and amorphous alkali-metal molybdate. From various experimental results it was concluded that the transformation was due to a room temperature solid state reaction.     

Unusual features of micellar diffusion

Diffusion coefficients of tetradecyltrimethylammonium bromide in aqueous solutions have been determined at 25, 95 and 135 °C using the Taylor dispersion technique. The diffusion coefficient exhibits a minimum at a surfactant concentration above the critical micelle concentration (CMC). The results are interpreted in terms of electrostatic coupling and rapid exchange between micelle, surfactant monomer and counterions.     

手性氮磷配体与钌的配位过程的研究—原位变温 31P核磁及分子模拟计算

用原位变温 ³¹P NMR和分子模拟研究了手性氮磷配体与金属钌的配位过程。首先确定了配体及其与金属的配合物的化学位移信号分别在δ=-13.0ppm和δ=48.2ppm。配位过程在293～343K温度范围内,相继生成四配位和五配位中间体。四配位体在 ³¹P NMR上对应于30.8ppm和-15.0ppm的两个信号;五配位中间体对应于35.1ppm和-16.5ppm的两个信号;最后在343K,产物中只有六配位的配合物存在,其信号出现在48.2ppm。为了得到各种中间体的结构,用分子模拟方法进行了结构优化计算,并比较了它们的构象能。计算结果表明,四配位中间体有两种构象,能量相差9kcal·mol^-1,它们可能同时存在于平衡状态。而五配位中间体只有一种绝对优势构象,尚有一个磷原子未参与配位。六配位的钌金属配合物的结构优化结果显示,两个氯原子分别位于PNNP原子所构成平面的两侧。其构象能为162.0kcal·mol^-1,其中键角能的贡献是112.5kcal·mol^-1,而非键静电作用是-41.4kcal·mol^-1,这表明分子内的静电吸引力对于形成完全配位产物是十分有利的,但是收敛的配体分子却承受了较大的键角张力。     

Fluorescence Analysis in Microarray Technology

Fluorescence has been the preferred choice for data quantification in biomedical microarray formats since their earliest days. As much as the formats have grown and evolved over the years, the methods in optical analysis have become ever more sophisticated and complex in order to produce more and better output. This review will provide an insight into the most common methods and the state-of-the-art of all areas in microarray fluorescence analysis. Starting with an overview on microarray formats with a focus on their demands on the readout, the most common and useful organic fluorescent stains are discussed before proceeding on to other approaches; the use of semiconductor nanocrystals (quantum dots), polymer and silica nanoparticles and fluorescent proteins. Ways to enhance the intrinsically low signal on biochips have become increasingly important as they offer a sound approach towards the detection of low concentration sample content. The three main categories are presented: amplification using DNA, enzymes, and dendrimers. As much diversity as on the microarrays themselves can be found at the detection device. Standard optical microarray detectors, and non-standard methods using fluorescence anisotropy, fluorescence lifetime imaging (FLIM) and fluorescence resonance energy transfer (FRET), and their advantages and disadvantages are discussed.